Anticorrosive primers
With a full range of anti-corrosion coatings, you can select the perfect system for your vessel design and operating conditions.
HEMPALIN PRIMER 12050 is a relatively quick-drying, zinc phosphate primer, based on long oil alkyd and urethane alkyd.
HEMPEL'S SPEED-DRY ALKYD 43140 is a very quick-drying anticorrosive primer/finish pigmented with zinc phosphate as anticorrosive inhibiting pigment.
HEMPADUR 15553 is a two-component epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F.
HEMPADUR FAST DRY 15560 is a two-component epoxy paint with a very short drying time. Contains zinc phosphate.
HEMPEL’S GALVOSIL 15700 is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion. It has excellent chemical resistance within the pH range 6-9.
HEMPADUR MASTIC 45880 is a two-component high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing.
HEMPADUR ZINC 17340 is a two-component zinc rich epoxy paint. It cures to a strong and corrosion resistant coating.
HEMPADUR FAST DRY 17410 is a two-component, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Contains zinc phosphate.
HEMPATEX HI-BUILD 46410 is physically drying high build paint with good colourretention as a flat finish. Based on acrylic resin and non-chlorinated plasticizer. Contains zinc phosphate. Resistant to salt water.
HEMPATHANE HS 55610 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate.
HEMPADUR MULTI-STRENGTH 35530 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion.Harmless to grain cargo.
HEMPADUR 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F.
HEMPEL’S SHOPPRIMER ZS 15890 is a two-component, solvent-borne zinc ethyl silicate shopprimer, designed for automatic spray application. Especially suited, where welding and gas-cutting properties are of importance.
HEMPADUR ZINC 17360 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage.
HEMPADUR QUATTRO 17634 is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.
HEMPADUR MULTI-STRENGTH 45540 is an amine-adduct cured epoxy coating. It is a hard, impact and abrasion resistant coating eg for splash zones.Suitable for early water exposure and will continue to cure under water.
HEMPADUR 35760 is a solvent-free, two-component, high-build phenolic epoxy (novolac) paint, which cures to a durable tank lining with very high corrosion protection properties and excellent chemical resistance.
HEMPADUR 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. Harmless to grain cargoes.Good resistance against abrasion, to seawater,mineral oils and related products.
HEMPADUR 85671 is a two-component, amine adduct cured phenolic epoxy (novolac) coating with very good adhesion and high temperature, water and chemical resistance.
HEMPEL’S UNI-PRIMER 13140 is a quick-drying, one-component primer with rust-inhibiting pigments.
Hempel's Speed-Dry Primer 13770 is a quick drying alkyd primer, containing zinc phosphate to enhance the anti-corrosion properties.
HEMPADUR AvantGuard 550 is a two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002. HEMPADUR AvantGuard 550 functions as a zinc-rich epoxy featuring a higher mechanical strength.
HEMPADUR AvantGuard 750 is a two-component, activated zinc-rich epoxy primer in compliance with the requirements in ISO 12944 Part 5, 2007 and Level 2, type II in SSPC Paint 20, 2002. Can utilize ASTM D520, type II zinc dust.
HEMPEL’S SHOPPRIMER E 15275 is a two-component epoxy polyamide shopprimer, pigmented with zinc phosphate rust-inhibiting pigments. It is designed for automatic spray application.
HEMPADUR 15590 is a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
HEMPADUR 35560 is a solvent-free, two-component, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water.
HEMPADUR MULTI-STRENGTH GF 35870 is an amine-adduct cured epoxy coating - the product is reinforced with Glassflakes. It is a hard, impact and abrasion resistant coating with good resistance to sea water and splashes from petrol and related products.
Deneb Invest Ltd.
Office
9002 Varna, Bulgaria
32 Tzar Simeon I str., floor 7
Tel:
052 / 600 234
052 / 600 235
052 / 630 795
052 / 630 796
Fax: 052 / 600 259
E-mail: sales
denebinvest.com