HEMPEL - Search products
www.denebinvest.com / Product Page
HEMPADUR MULTI-STRENGTH 35530
HEMPADUR MULTI-STRENGTH 35530
HEMPADUR MULTI-STRENGTH 35530 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion.Harmless to grain cargo.
HEMPADUR MULTI-STRENGTH 35530
HEMPADUR MULTI-STRENGTH 35530
HEMPADUR MULTI-STRENGTH 35530
HEMPADUR MULTI-STRENGTH 35530
HEMPADUR MULTI-STRENGTH 35530
Description

HEMPADUR MULTI-STRENGTH 35530 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil and to abrasion.
 Applicable in thick coats by standard heavy duty airless spray equipment.Harmless to grain cargo.

Recommended use:

  • As a heavy duty coating on steel exposed to abrasion where solvent-free materials are required.
  • Full colour retention will be of secondary importance. If solvent containing paints are accepted, HEMPADUR MULTI-STRENGTH 45751 substitutes.
  • As a lining in potable water tanks and pipelines.
Technical Parameters

PHYSICAL CONSTANTS:



Shade nos/Colours: 10500* / Grey.
Finish: Semi-gloss
Volume solids, %: 100
Theoretical spreading rate: 3.3 [134.4 sq.ft./US gallon] 300 micron
VOC content: 9 g/l [0.1 lbs/US gallon]
Fully cured: 7 day(s) 20°C/68°F
Dry to touch: 24 hour(s) 20°C/68°F
Specific gravity: 1.3 kg/litre [11.2 lbs/US gallon]
Flash point: 100 °C [212 °F]

Surface dry: 12 approx. hour(s) 20°C/68°F

                           *other shades according to assortment list.
                           The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

 

APPLICATION DETAILS:


Version; mixed product: 35530
Mixing ratio: BASE 35539 : CURING AGENT 95530

                   3 : 1 By volume

                   Stir CURING AGENT before adding it to the BASE.
Application method: Airless spray / Brush
Thinner (max.vol.): Do not dilute. (Consult the separate APPLICATION INSTRUCTIONS)
Pot life: 1 approx. hour(s) 20°C/68°F (Consult the separate APPLICATION INSTRUCTIONS)
Nozzle orifice: 0.019 - 0.031 "
Nozzle pressure: >250 [>3625 psi]
                          (Airless spray data are indicative and subject to adjustment)
Indicated film thickness, dry: 300 micron [12 mill]
Indicated film thickness, wet: 300 micron [12 mill]
Recoat interval, min: According to separate APPLICATION INSTRUCTIONS
Recoat interval, max: According to separate APPLICATION INSTRUCTIONS

Safety Measures
Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.

HEMPADUR MULTI-STRENGTH 35530 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil and to abrasion.
 Applicable in thick coats by standard heavy duty airless spray equipment.Harmless to grain cargo.

Recommended use:

  • As a heavy duty coating on steel exposed to abrasion where solvent-free materials are required.
  • Full colour retention will be of secondary importance. If solvent containing paints are accepted, HEMPADUR MULTI-STRENGTH 45751 substitutes.
  • As a lining in potable water tanks and pipelines.

PHYSICAL CONSTANTS:



Shade nos/Colours: 10500* / Grey.
Finish: Semi-gloss
Volume solids, %: 100
Theoretical spreading rate: 3.3 [134.4 sq.ft./US gallon] 300 micron
VOC content: 9 g/l [0.1 lbs/US gallon]
Fully cured: 7 day(s) 20°C/68°F
Dry to touch: 24 hour(s) 20°C/68°F
Specific gravity: 1.3 kg/litre [11.2 lbs/US gallon]
Flash point: 100 °C [212 °F]

Surface dry: 12 approx. hour(s) 20°C/68°F

                           *other shades according to assortment list.
                           The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

 

APPLICATION DETAILS:


Version; mixed product: 35530
Mixing ratio: BASE 35539 : CURING AGENT 95530

                   3 : 1 By volume

                   Stir CURING AGENT before adding it to the BASE.
Application method: Airless spray / Brush
Thinner (max.vol.): Do not dilute. (Consult the separate APPLICATION INSTRUCTIONS)
Pot life: 1 approx. hour(s) 20°C/68°F (Consult the separate APPLICATION INSTRUCTIONS)
Nozzle orifice: 0.019 - 0.031 "
Nozzle pressure: >250 [>3625 psi]
                          (Airless spray data are indicative and subject to adjustment)
Indicated film thickness, dry: 300 micron [12 mill]
Indicated film thickness, wet: 300 micron [12 mill]
Recoat interval, min: According to separate APPLICATION INSTRUCTIONS
Recoat interval, max: According to separate APPLICATION INSTRUCTIONS

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.