HEMPADUR ZINC 17340 is a two-component zinc rich epoxy paint. It cures to a strong and corrosion resistant coating.

Recommended use:

• As a "VOC compliant" primer on steel in medium to severely corrosive environment.
• May be applied on zinc-shopprimed steel, where damaged spots, welds etc. have been power tool cleaned.
• For on-line application on containers. In compliance with SSPC-Paint 20, type 2, level 3.

PHYSICAL CONSTANTS:

 

Shade nos/Colours: 19830 /  Reddish grey

Finish: Semi-flat

Volume solids, %: 66 ± 1

Theoretical spreading rate: 13.2 m2/l [529.3 sq.ft./US gallon] - 50 micron/2 mils

Flash point: 24 °C [75.2 °F]

Specific gravity: 2.3 kg/litre [19.2 lbs/US gallon]

Surface dry: 2 approx. hour(s) 20°C/68°F

Dry to touch:3 hour(s) 20°C/68°F

Fully cured: 7 day(s) 20°C/68°F

VOC content: 323 g/l [2.7 lbs/US gallon]

                          The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

 

 

APPLICATION DETAILS:

 

 

Version, mixed product: 17340

Mixing ratio: BASE 17349 : CURING AGENT 97040

                   4 : 1 by volume

Application method: Airless spray / Air spray / Brush

Thinner (max.vol.): 08450 (5%) / 08450 (15%) / 08450 (5%)

Pot life: 2 hour(s) (20°C/68°F)

Nozzle orifice: 0.017 - 0.021 "

Nozzle pressure: 175 bar [2537.5 psi]

                          (Airless spray data are indicative and subject to adjustment)

Cleaning of tools: HEMPEL'S TOOL CLEANER 99610

Indicated film thickness, dry: 50 micron [2 mils] see REMARKS overleaf

Indicated film thickness, wet: 75 micron [3 mils]

 

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.