HEMPEL'S SPEED-DRY ALKYD 43140 is a very quick-drying anticorrosive primer/finish pigmented with zinc phosphate as anticorrosive inhibiting pigment. HEMPEL'S SPEED-DRY ALKYD 43140 is also available in a Micaceous Iron Oxide and aluminium pigmented version as shade 19760.

Features:

-Very fast drying properties, perfect solution for in shop application
-Excellent recoatability with polyurethane, alkyd and chlorinated rubber topcoats
-Good results with most means of application including brush
-Good adhesion to steel
-Friendly for both user and environment, does not contain any lead and chromates

 

Recommended use:

• HEMPEL'S SPEED-DRY ALKYD 43140 can be used as a single/double coat anticorrosive primer/finish for steel structures, general steel work and a multitude of applications for heavy and light steel industry, where quick drying properties are required.
• It is for general use, in exterior and interior steel surfaces.
• Suitable for protection of steel in mild to medium atmospheric corrosive environments.

PHYSICAL CONSTANTS:

 

Shade nos/Colours: 11150*/ Grey.

Finish: Flat

Volume solids, %: 49 ± 1

Theoretical spreading rate: 7 m2/l [280.7 sq.ft./US gallon] - 70 micron/2.8 mils

Flash point: 25 °C [77 °F]

Specific gravity: 1.4 kg/litre [12 lbs/US gallon]

Dry to touch: 15 minute(s) , 20°C/68°F

                       Proper ventilation is required.

Dry to handle: 1 hour(s) , 20°C/68°F

VOC content: 442 g/l [3.7 lbs/US gallon]

                        *Wide range of colours available via Hempel's MULTI-TINT system.

                                 The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

 

 

APPLICATION DETAILS:

 

Application method: Brush/Roller (touch up) / Airless spray

Thinner (max.vol.): 08080 (5%) / 08080 (5%)

Nozzle orifice: 0.015 - 0.021 " (see REMARKS overleaf)

Nozzle pressure: 200 bar [2900 psi]

                            (Airless spray data are indicative and subject to adjustment)

Cleaning of tools: HEMPEL'S THINNER 08080

Indicated film thickness, dry: 40 - 120 micron [1.6 - 4.8 mils]

Indicated film thickness, wet: 85 - 250 micron [3.4 - 10 mils]

 

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.