HEMPEL’S GALVOSIL 15700 is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion. It has excellent chemical resistance within the pH range 6-9.
HEMPATEX HI-BUILD 46410 is physically drying high build paint with good colourretention as a flat finish. Based on acrylic resin and non-chlorinated plasticizer. Contains zinc phosphate. Resistant to salt water.
HEMPADUR MULTI-STRENGTH 35530 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion.Harmless to grain cargo.
HEMPADUR MULTI-STRENGTH 45540 is an amine-adduct cured epoxy coating. It is a hard, impact and abrasion resistant coating eg for splash zones.Suitable for early water exposure and will continue to cure under water.
HEMPADUR 35760 is a solvent-free, two-component, high-build phenolic epoxy (novolac) paint, which cures to a durable tank lining with very high corrosion protection properties and excellent chemical resistance.
HEMPADUR 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. Harmless to grain cargoes.Good resistance against abrasion, to seawater,mineral oils and related products.
HEMPATEX ENAMEL 56360 is a finishing coat based on acrylic resin and nonchlorinated plasticizer for optimum gloss and colour retention.Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.
HEMPADUR MULTI-STRENGTH GF 35870 is an amine-adduct cured epoxy coating - the product is reinforced with Glassflakes. It is a hard, impact and abrasion resistant coating with good resistance to sea water and splashes from petrol and related products.