HEMPEL’S GALVOSIL 15700 is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion. It has excellent chemical resistance within the pH range 6-9.
HEMPATEX HI-BUILD 46410 is physically drying high build paint with good colourretention as a flat finish. Based on acrylic resin and non-chlorinated plasticizer. Contains zinc phosphate. Resistant to salt water.
HEMPACORE ONE FD 43601 is a fast drying one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. It is suitable for in-shop and on-site applications.
HEMPADUR MULTI-STRENGTH 35530 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion.Harmless to grain cargo.
HEMPEL’S SHOPPRIMER ZS 15890 is a two-component, solvent-borne zinc ethyl silicate shopprimer, designed for automatic spray application. Especially suited, where welding and gas-cutting properties are of importance.
HEMPADUR MULTI-STRENGTH 45540 is an amine-adduct cured epoxy coating. It is a hard, impact and abrasion resistant coating eg for splash zones.Suitable for early water exposure and will continue to cure under water.
HEMPADUR 35760 is a solvent-free, two-component, high-build phenolic epoxy (novolac) paint, which cures to a durable tank lining with very high corrosion protection properties and excellent chemical resistance.
HEMPADUR 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. Harmless to grain cargoes.Good resistance against abrasion, to seawater,mineral oils and related products.
HEMPATEX ENAMEL 56360 is a finishing coat based on acrylic resin and nonchlorinated plasticizer for optimum gloss and colour retention.Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.
HEMPACORE AQ 48860 is a one-component water-borne, chlorine free, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. It has no VOC and it is suitable for in-shop and on-site applications.
Hempafire Pro 315 43360 is a one component, solvent-borne, intumescent coating, optimised for 60 minutes for protection of structural steel against cellulosic fires. It is suitable for in-shop and on-site applications.
HEMPADUR AvantGuard 550 is a two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002. HEMPADUR AvantGuard 550 functions as a zinc-rich epoxy featuring a higher mechanical strength.
HEMPADUR AvantGuard 750 is a two-component, activated zinc-rich epoxy primer in compliance with the requirements in ISO 12944 Part 5, 2007 and Level 2, type II in SSPC Paint 20, 2002. Can utilize ASTM D520, type II zinc dust.
HEMPADUR MULTI-STRENGTH GF 35870 is an amine-adduct cured epoxy coating - the product is reinforced with Glassflakes. It is a hard, impact and abrasion resistant coating with good resistance to sea water and splashes from petrol and related products.