HEMPEL - Search products
www.denebinvest.com / Product Page
HEMPADUR 45143
HEMPADUR 45143
HEMPADUR 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. Harmless to grain cargoes.Good resistance against abrasion, to seawater,mineral oils and related products.
HEMPADUR 45143
HEMPADUR 45143
HEMPADUR 45143
HEMPADUR 45143
HEMPADUR 45143
HEMPADUR 45143
Description

HEMPADUR 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes.

Recommended use:

1. As a high build primer, intermediate and/or finishing coat in (heavy duty) paint systems according to specification. (As a finishing coat where a cosmetic appearance is of less importance).
2. For repair and maintenance work at application temperatures above -10°C/15°F on hatch covers, decks, in cargo holds and ballast tanks etc.


HEMPADUR 45143 is intended for use in cold/temperate climates.

 

Technical Parameters

PHYSICAL CONSTANTS:


Shade nos/Colours: 50630*/ Red
Finish: Semi-gloss
Volume solids, %: 60 ± 1
Theoretical spreading rate: 4 m2/l [160.4 sq.ft./US gallon] - 150 micron/6 mils
VOC content: 367 g/l [3 lbs/US gallon]
Fully cured: 20 day(s) 5°C/41°F
Dry to touch: 11 (approx.) hour(s) 5°C/41°F

Surface dry: 5 (approx.) hour(s) 5°C/41°F
Specific gravity: 1.3 kg/litre [10.6 lbs/US gallon]
Flash point: 25 °C [77 °F]

                                      *other shades according to assortment list.

                                       The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

 

APPLICATION DETAILS:


Version, mixed product: 45143
Mixing ratio: BASE 45148: CURING AGENT 97430

                   3:1 by volume
Application method:  Airless spray / Brush
Thinner (max.vol.):  08450 (5%) / 08450 (5%)
Nozzle orifice: 0.019 - 0.023 "
Nozzle pressure: 250 bar [3625 psi]
                          (Airless spray data are indicative and subject to adjustment)
Indicated film thickness, dry: 150 micron [6 mils]
Indicated film thickness, wet: 250 micron [10 mils]
Pot life (Airless spray): 2 hour(s) 15°C/59°F
Pot life (Brush): 4 hour(s) 15°C/59°F
Cleaning of tools: HEMPEL'S TOOL CLEANER 99610 or HEMPEL'S THINNER 08450
 

Safety Measures
Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.

HEMPADUR 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes.

Recommended use:

1. As a high build primer, intermediate and/or finishing coat in (heavy duty) paint systems according to specification. (As a finishing coat where a cosmetic appearance is of less importance).
2. For repair and maintenance work at application temperatures above -10°C/15°F on hatch covers, decks, in cargo holds and ballast tanks etc.


HEMPADUR 45143 is intended for use in cold/temperate climates.

 

PHYSICAL CONSTANTS:


Shade nos/Colours: 50630*/ Red
Finish: Semi-gloss
Volume solids, %: 60 ± 1
Theoretical spreading rate: 4 m2/l [160.4 sq.ft./US gallon] - 150 micron/6 mils
VOC content: 367 g/l [3 lbs/US gallon]
Fully cured: 20 day(s) 5°C/41°F
Dry to touch: 11 (approx.) hour(s) 5°C/41°F

Surface dry: 5 (approx.) hour(s) 5°C/41°F
Specific gravity: 1.3 kg/litre [10.6 lbs/US gallon]
Flash point: 25 °C [77 °F]

                                      *other shades according to assortment list.

                                       The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

 

APPLICATION DETAILS:


Version, mixed product: 45143
Mixing ratio: BASE 45148: CURING AGENT 97430

                   3:1 by volume
Application method:  Airless spray / Brush
Thinner (max.vol.):  08450 (5%) / 08450 (5%)
Nozzle orifice: 0.019 - 0.023 "
Nozzle pressure: 250 bar [3625 psi]
                          (Airless spray data are indicative and subject to adjustment)
Indicated film thickness, dry: 150 micron [6 mils]
Indicated film thickness, wet: 250 micron [10 mils]
Pot life (Airless spray): 2 hour(s) 15°C/59°F
Pot life (Brush): 4 hour(s) 15°C/59°F
Cleaning of tools: HEMPEL'S TOOL CLEANER 99610 or HEMPEL'S THINNER 08450
 

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.