Hempafire Pro 315 43360 is a one component, solvent-borne, intumescent coating, optimised for 60 minutes for protection of structural steel against cellulosic fires. It is suitable for in-shop and on-site applications.
Recommended use:
- As passive fire protection for structural steel in interior and exterior conditions (Up to C4 conditions ISO 12944-2). Suitable for open profile beams and columns, cellular beams and hollow section beams and columns.
- As a repair and touch up coating for damaged areas of freshly applied Hempafire Pro 315.
PHYSICAL CONSTANTS:
Shade nos/Colours: 10000/ White
Finish: Flat
Volume solids, %: 75 ± 3
Theoretical spreading rate: 1 m2/l [40.1 sq.ft./US gallon] - 750 micron/30 mils
Flash point: 23 °C [73.4 °F]
Specific gravity:1.3 kg/litre [11.2 lbs/US gallon]
Surface-dry: 15 approx. minute(s) at 20°C/68°F - 750 micron/30 milsThrough-dry: 21 approx. hour(s) 20°C/68°F - 750 micron/30 mils
Dry to handle:See separate APPLICATION INSTRUCTIONS
VOC content: 330 g/l [2.8 lbs/US gallon]
Shelf life:2 months 25°C/77°F , thereafter the paint quality is subject to re-inspection
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.
APPLICATION DETAILS:
Application method: Airless spray / Brush
Thinner (max.vol.): Not recommended
Nozzle orifice: 0.017 " 0.023"
Nozzle pressure: 200 bar [2900 psi]
(Airless spray data are indicative and subject to adjustment)
Indicated film thickness, dry:The Dry Film Thickness (DFT) is dependent on the required fire resistance as well as the massivity factor (Hp/A) of the steel element. Consult your local Hempel representative for more information.
Overcoat interval, min: See separate APPLICATION INSTRUCTIONS
Overcoat interval, max: See separate APPLICATION INSTRUCTIONS
Hempafire Pro 315 43360 is a one component, solvent-borne, intumescent coating, optimised for 60 minutes for protection of structural steel against cellulosic fires. It is suitable for in-shop and on-site applications.
Recommended use:
- As passive fire protection for structural steel in interior and exterior conditions (Up to C4 conditions ISO 12944-2). Suitable for open profile beams and columns, cellular beams and hollow section beams and columns.
- As a repair and touch up coating for damaged areas of freshly applied Hempafire Pro 315.
PHYSICAL CONSTANTS:
Shade nos/Colours: 10000/ White
Finish: Flat
Volume solids, %: 75 ± 3
Theoretical spreading rate: 1 m2/l [40.1 sq.ft./US gallon] - 750 micron/30 mils
Flash point: 23 °C [73.4 °F]
Specific gravity:1.3 kg/litre [11.2 lbs/US gallon]
Surface-dry: 15 approx. minute(s) at 20°C/68°F - 750 micron/30 milsThrough-dry: 21 approx. hour(s) 20°C/68°F - 750 micron/30 mils
Dry to handle:See separate APPLICATION INSTRUCTIONS
VOC content: 330 g/l [2.8 lbs/US gallon]
Shelf life:2 months 25°C/77°F , thereafter the paint quality is subject to re-inspection
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.
APPLICATION DETAILS:
Application method: Airless spray / Brush
Thinner (max.vol.): Not recommended
Nozzle orifice: 0.017 " 0.023"
Nozzle pressure: 200 bar [2900 psi]
(Airless spray data are indicative and subject to adjustment)
Indicated film thickness, dry:The Dry Film Thickness (DFT) is dependent on the required fire resistance as well as the massivity factor (Hp/A) of the steel element. Consult your local Hempel representative for more information.
Overcoat interval, min: See separate APPLICATION INSTRUCTIONS
Overcoat interval, max: See separate APPLICATION INSTRUCTIONS
Deneb Invest Ltd.
Office
9002 Varna, Bulgaria
32 Tzar Simeon I str., floor 7
Tel:
052 / 600 234
052 / 600 235
052 / 630 795
052 / 630 796
Fax: 052 / 600 259
E-mail: sales
denebinvest.comWarehouse
9009 Varna, Bulgaria
West industrial zone,
Mladost district, 128 Devnya str.
088 /893 5714