HEMPEL - Search products
www.denebinvest.com / Product Page
HEMPADUR 15570
HEMPADUR 15570
HEMPADUR 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F.
HEMPADUR 15570
HEMPADUR 15570
HEMPADUR 15570
Description

HEMPADUR 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F. The Micaceous Iron Oxide pigmented reddish grey 12430 shade is also well suited for application under humid conditions, on damp steel surfaces, and may be applied on moist surfaces. The greyish yellow 21780 and the grey 11320 shades contains zinc phosphate.

Recommended use:

 

  1. As a maintenance and repair primer, intermediate, and/or finishing coat in HEMPADUR systems in severely corrosive environment.
  2. As a finishing coat where a cosmetic appearance is of less importance.
  3. As a low temperature curing epoxy primer, intermediate, and/or finishing coat in paint systems according to specification.
  4. Well suited as a (blast) primer in epoxy systems.
  5. Mist coat on GALVOSIL.
Technical Parameters

PHYSICAL CONSTANTS:



Shade nos/Colours: 12430 (MIO)* / Reddish grey
Finish: Flat
Volume solids, %:  54 ± 1
Theoretical spreading rate:  5.4 m2/l [216.5 sq.ft./US gallon] - 100 micron/4 mils
VOC content:  414 g/l [3.4 lbs/US gallon]

Surface dry: 1 approx. hour(s) 20°C/68°F
Through dry: 5 approx. hour(s) 20°C/68°F

Fully cured: 7 day(s) 20°C/68°F
Specific gravity: 1.4 kg/litre [11.6 lbs/US gallon]
Flash point:  25 °C [77 °F]
                                    *other shades according to assortment list.

                                    The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

 

 

APPLICATION DETAILS:


Version, mixed product: 15570
Mixing ratio: BASE 15579: CURING AGENT 95570    
                    3 : 1 by volume
Application method:  Airless spray / Air spray / Brush
Thinner (max.vol.):  08450 (5%) / 08450 (15%) / 08450 (5%)
Nozzle orifice:0.019 - 0.021 "
Nozzle pressure: 175 bar [2537.5 psi]

                 (Airless spray data are indicative and subject to adjustment)

Pot life:2 hour(s) 20°C/68°F
Indicated film thickness, dry: 100 micron [4 mils]

Indicated film thickness, wet: 200 micron [8 mils]

Safety Measures
Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.

HEMPADUR 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F. The Micaceous Iron Oxide pigmented reddish grey 12430 shade is also well suited for application under humid conditions, on damp steel surfaces, and may be applied on moist surfaces. The greyish yellow 21780 and the grey 11320 shades contains zinc phosphate.

Recommended use:

 

  1. As a maintenance and repair primer, intermediate, and/or finishing coat in HEMPADUR systems in severely corrosive environment.
  2. As a finishing coat where a cosmetic appearance is of less importance.
  3. As a low temperature curing epoxy primer, intermediate, and/or finishing coat in paint systems according to specification.
  4. Well suited as a (blast) primer in epoxy systems.
  5. Mist coat on GALVOSIL.

PHYSICAL CONSTANTS:



Shade nos/Colours: 12430 (MIO)* / Reddish grey
Finish: Flat
Volume solids, %:  54 ± 1
Theoretical spreading rate:  5.4 m2/l [216.5 sq.ft./US gallon] - 100 micron/4 mils
VOC content:  414 g/l [3.4 lbs/US gallon]

Surface dry: 1 approx. hour(s) 20°C/68°F
Through dry: 5 approx. hour(s) 20°C/68°F

Fully cured: 7 day(s) 20°C/68°F
Specific gravity: 1.4 kg/litre [11.6 lbs/US gallon]
Flash point:  25 °C [77 °F]
                                    *other shades according to assortment list.

                                    The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

 

 

APPLICATION DETAILS:


Version, mixed product: 15570
Mixing ratio: BASE 15579: CURING AGENT 95570    
                    3 : 1 by volume
Application method:  Airless spray / Air spray / Brush
Thinner (max.vol.):  08450 (5%) / 08450 (15%) / 08450 (5%)
Nozzle orifice:0.019 - 0.021 "
Nozzle pressure: 175 bar [2537.5 psi]

                 (Airless spray data are indicative and subject to adjustment)

Pot life:2 hour(s) 20°C/68°F
Indicated film thickness, dry: 100 micron [4 mils]

Indicated film thickness, wet: 200 micron [8 mils]

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.